Buying GuidesProduct Reviews

5 Best Exhaust Pipe Cutters Reviews 2019

Best Exhaust Pipe Cutters ReviewsBest Exhaust Pipe Cutters

​There are a lot of ways you can cut a tailpipe. If it’s on the vehicle, nothing works as a good as a Sawzall. But what happens when you have to cut an exhaust when it’s not stuck on the vehicle? For that, you need the tailpipe cutter. Finding out the best exhaust pipe cutters is not a hard job at all.

You can either use an angle grinder with cutting wheel. Or if you want a smooth finish, and don’t want to make noise on the process, you need the best exhaust pipe cutter for the job.

Sawzall is useful when you have to get under the wheel because it produces less shrapnel spraying and sparking. Angle grinders are for fast and industrial work. But a tailpipe cutter is best for making smooth and clean cuts without making a lot of noise.

You can’t be a Redneck if your vehicle doesn’t make loud exhaust noise. Cutting the exhaust pipe off can unleash the raw sound of what your car makes.

There are plenty of tailpipe cutters, but you need to make sure you get yourself the right one for the job. To do that, check out my top 5 exhaust pipe cutters review that you can use on any type of vehicles.

Top 5 best Exhaust Pipe Cutters Review

1. OEMTOOLS 27045 Tailpipe Cutter

​This tailpipe cutter from OEMTOOLS is designed to cut pipes in tight spaces where other saws can’t reach. If the exhaust you are cutting is between 3/4-Inch to 3-1/4-Inch diameter, this tool can get the job done. It works fine on 3-inch stainless steel pipes. The blades are sharp and stay sharp for a long time.

The blades on the cutting wheel are made out of hardened steel and have one blade on each roller that gives you smoother cutting experience. The long handles are cushioned and have a solid grip. The tool itself weighs less than 2 pounds which makes it very convenient for working long hours.

If you are worried about the durability of this tool, don’t worry. These blades are strong enough to cut pipes for a long time. This tailpipe cutter is meant to be used occasionally and not for production use. Press-fit pins are used to hold the blades in place, so I’m assuming these wheels are replaceable in case they do get dull.

For occasional use, this cutter works amazingly well. As long as you use this tool for cutting exhaust pipes and thin-metal tubing, it will work superbly. Make sure to work carefully and also oil the pipe and the blades as you go.

It’s a good quality tool, and if you follow the instructions carefully, it should be good for a lot of cuts. The quality is great and well worth the money. The chain is 5/8-inch long, and as long as you can get the chain in between pipes to cut, you should be good to go.

It’s a good quality tool, and if you follow the instructions carefully, it should be good for a lot of cuts. The quality is great and well worth the money. The chain is 5/8-inch long, and as long as you can get the chain in between pipes to cut, you should be good to go.
This tailpipe cutter from OEMTOOLS is designed to cut pipes in tight spaces where other saws can’t reach. If the exhaust you are cutting is between 3/4-Inch to 3-1/4-Inch diameter, this tool can get the job done. It works fine on 3-inch stainless steel pipes. The blades are sharp and stay sharp for a long time.

There are a lot of ways you can cut a tailpipe. If it’s on the vehicle, nothing works as a good as a Sawzall. But what happens when you have to cut an exhaust when it’s not stuck on the vehicle? For that, you need the tailpipe cutter.

What We Like:

  • ​Long cushioned handle for tighter grip.
    Long cushioned handle for tighter grip.
  • ​5/8” chain with hardened steel blades.
    5/8” chain with hardened steel blades.
  • ​Easy to cut pipes in tight spaces.
    Easy to cut pipes in tight spaces.

What We Didn't Like:

  • ​Not meant to be used on a daily basis.
    Not meant to be used on a daily basis.

​2. Grip-On GR18210BK 10-Inch Chain Pipe Cutter

2. Grip-On GR18210BK 10-Inch Chain Pipe Cutter

This 10-inch chain pipe cutter for Grip-on has everything you need to make clean and smooth cuts. It’s a multi-functional tool that has the capacity to cut up to 3-inches. You can use the Grip-On GR18210BK to cut thin copper, PVC, and stainless-steel pipes. It doesn’t work well with cast iron pipes.

One cool feature I like about this tool is that it eliminates the need to apply hand pressure on the handles. There is a knob at the end of the handle that you can twist to adjust the chain pressure. Once you feel less resistant when rotating to the tool, you just simply turn the knob until you get the right grip on the pipe.

The pipe cutters are designed in a way that ensures you get perfect tracking each time you attempt to cut a pipe. The chain on this tool is heat treated, highly flexible and heavy-duty. On top of that, you can easily adjust it around any shaped object. It is designed to make perfectly straight cuts.

​The orange epoxy coating on the tool is spatter-resistant which means you can work on old carbon filled pipes without damaging the tool. The chain easily rolls around the pipe, and you need very little clearance to cut around the circumference of the exhaust pipe.

The orange epoxy coating on the tool is spatter-resistant which means you can work on old carbon filled pipes without damaging the tool. The chain easily rolls around the pipe, and you need very little clearance to cut around the circumference of the exhaust pipe.

What We Like:

  • ​Cuts at a perfect 90-degree angle.
    Cuts at a perfect 90-degree angle.
    Long cushioned handle for tighter grip.
  • ​Eliminates the need to add hand pressure.
    Eliminates the need to add hand pressure.
    5/8” chain with hardened steel blades.
  • ​Heavy-duty and heat-treated chain.
    Heavy-duty and heat-treated chain.
    Easy to cut pipes in tight spaces.

What We Didn't Like:

  • ​You can’t make angle cuts with this one.
    You can’t make angle cuts with this one.
    Not meant to be used on a daily basis.

​3. RIDGID 69982 Model 226 In-Place Soil Pipe Cutter, 1-1/2-inch to 6-inch Chain Pipe Cutter

3. RIDGID 69982 Model 226 In-Place Soil Pipe Cutter, 1-1/2-inch to 6-inch Chain Pipe Cutter
 

This tool from RIDGID isn’t your typical tailpipe cutter. You can use this one for a lot of cutting jobs. It’s a lightweight and compact tool with a 17-inch tool design that can cut soil pipes both hub and hub-less in tight spaces.

Even with limited space or against the wall cutting jobs, this pipe cutter can get the job done. It’s perfect for cutting clay pipes, cast iron pipes or even cement pipes. For easy latching, this tool has a unique rotating hook that wraps around the pipe and locks the chain in place.

A tool like this might look heavy at first. Also, the design seems too complicated to work in tight quarters. But surprisingly, that is not the case with this one. In fact, it is perfect for crawlspace and overhead work. Although it weighs over 18 lbs, but there is a trick to make proper use of this tool.

You need to use both of your hands first to get the tool into position. Once the chain is around the object you are cutting, latch it, and the tool will support itself once you start adjusting the tension. It takes some practice, but it is worth it.

If you want a chain type pipe cutter that won’t make any noise or spray, this is the right tool to get. It works better than a grinder or a Sawzall. As long as you can wrap around the chain on a pipe, this tool can make the cut. 

What We Like:

  • ​A better alternative to grinders.
    A better alternative to grinders.
    Long cushioned handle for tighter grip.
  • ​Very steady and works like a charm.
    Very steady and works like a charm.
    5/8” chain with hardened steel blades.
  • ​Easy to adjust the tension.
    Easy to adjust the tension.
    Easy to cut pipes in tight spaces.

What We Didn't Like:

  • ​It’s an overkill for an exhaust pipe.
    It’s an overkill for an exhaust pipe.
    Not meant to be used on a daily basis.

​4. GEARWRENCH 2031DD Exhaust and Tailpipe Cutter

4. GEARWRENCH 2031DD Exhaust and Tailpipe Cutter

This exhaust pipe cutter from GEARWRENCH features 15 blades on the chains and is designed to cut effortlessly with minimal turns. Because of the chain design, you only need to rotate the tool ¼-inch to make a complete cut. You can easily cut 3/4″ – 3″ pipes as long as you are working with thin-walled tubing.

The design of the tool makes it easy to reach tight spaces where no other tools can’t fit. Since tailpipes have very little clearance on the top, and there isn’t really that much space for you to move your hands, this is where this tool shines the most.

The blades are very sharp and make a smooth final cut. However, it is not suitable for stainless-steel pipes or double wall pipes. It’s not completely impossible to cut thick steel pipes; you just need to have some patience and keep the chains and pipes oiled.

I would suggest you spray the cutting surface with WD40 oil. It’s a sensitive tool and not meant to handle pressure. Because the blades are so sharp, they will easily get dull if handled improperly. A tool like this will only perform well if the user knows what he/she is doing.

Plastisol-dipped handles are there to give you an easy grip as well as provide comfort. The tool itself weighs only 1.16 pounds which is very lightweight, and perfect for working long hours.

What We Like:

  • ​Only a quarter turn requires to finish a cut.
    Only a quarter turn requires to finish a cut.
    Long cushioned handle for tighter grip.
  • ​15 sharp blades.
    15 sharp blades.
    5/8” chain with hardened steel blades.
  • ​Comfortable handle.
    Comfortable handle.
    Easy to cut pipes in tight spaces.

What We Didn't Like:

  • ​Sensitive to pressure.
    Sensitive to pressure.

    Not meant to be used on a daily basis.

5. IRWIN VISE-GRIP Original Locking Chain Clamp, 9", 27ZR

The last item on this list and ironically, this isn’t a Tailpipe cutter. It looks exactly the same, but it has no blades on the chain. Nevertheless, this is a must-have tool for every vehicle owner.

It’s a clamp and a 9” one. This chain will hold the pipe firmly when you have trouble cutting. It even locks around the cutting object regardless of size and shape. It is ideal for those troublesome pieces that won’t just stay put and constantly moves as you twist and turn.

Similar to a tailpipe cutter, it even has the tension adjustable screws at the end. This screw eliminates the need to constantly apply pressure on the handle. It’s ideal for repetitive use and keeps the pressure adjusted.

The whole unit is made out of durable, high-grade, heat-treated alloy steel. Because it’s a chain locking clamp, it features a classic trigger release that gives you maximum clamping force.

What We Like:

  • ​Durable construction.
    Durable construction.
    Long cushioned handle for tighter grip.
  • ​Designed to put maximum locking force.
    Designed to put maximum locking force.
    5/8” chain with hardened steel blades.
  • ​Tension adjustable screws.
    Tension adjustable screws.
    Easy to cut pipes in tight spaces.

What We Didn't Like:

  • ​Expensive.
    Expensive.
    Not meant to be used on a daily basis.

Why You Should Use A Tailpipe Cutter

When looking for a cutting tool for exhaust, if you have enough space to swing a chain over the pipe, nothing works best like a chain type pipe cutter. You can make a clean cut without having any jagged edges.

They also need very little clearance because all you need to do is swing the chain around, hook it up with the handle and apply pressure as you swing the chain. This is definitely the way to cut an exhaust pipe properly.

It’s not a fast-paced process nor it’s productive, but the result is very satisfying. Just make sure you oil what you are cutting. And also make sure the pipe is not rusted.

It’s not a fast-paced process nor it’s productive, but the result is very satisfying. Just make sure you oil what you are cutting. And also make sure the pipe is not rusted.

Rust can dull the blades on the cutter, and they also don’t work well when dry. These cutters can deliver a clean cut better than a reciprocating saw. You also minimize the risk of damaging other parts of the vehicle.

If you go with a Sawzall, it is difficult to get a perfectly straight cut. And there is also the risk of pipes bouncing which can easily bind the blade.

In my opinion, a chain type cutter is best for this kind of job and should do just fine if you take it slow. An exhaust pipe which is cut by using a chain-like cutter is also easier to reweld.

The pipe builds up a lot of carbon and junk on the steel because of the engine running. When you use a saw to cut the pipe, the carbon steel spatters all over the place. The smoother the cut is, the easier it is to reweld with carbon steel and gas.

How to Cut Exhaust Pipe Using A Tail Pipe Cutter?

Using a tailpipe cutter is a convenient, efficient and cleaner way to get the job done. A tail pipe cutter has handles on each side and has basically round cutting wheel.

The mechanism is very simple. You just grab the round blades and attach them to the small hook. Then tighten the tool down and apply just enough pressure to hold and squeeze the pipe.

Then rotate the tool as you increase pressure around the pipe and you will get a clean cut. It does take more time and patience but results in a fine and smooth cut.

As you turn back and forth, the cutting wheels are going to make small cuts. It’s important to keep the pipe stationary. I would suggest you use a clamp to hold the pipe in place. Otherwise, it will take you longer than usual.

As you rotate to tool around the pipe, it’s going to go to a point where it will be less resistant, and your rotations will get easier. This is the point where you should add more pressure to the handles to squeeze the cutting wheels a little further into the pipe.

If you squeeze too hard, it’s going be harder for you to rotate the tool. Just be gentle with it and take your time.

​Final word

Hope you found what you were looking for in this exhaust pipe cutters review. Just keep in mind that these are not production tools and not for fast-paced work. These are designed to work on tight spots and make smooth and finish cuts.

​They might take 5x longer than an angle grinder with blades, but the result is really worth the wait. Let me know if you have found the Best Exhaust Pipe Cutters guide useful in the comments below.

They might take 5x longer than an angle grinder with blades, but the result is really worth the wait. Let me know if you have found the Best Exhaust Pipe Cutters guide useful in the comments below.
How to Cut Exhaust Pipe Using A Tail Pipe Cutter?

The pipe builds up a lot of carbon and junk on the steel because of the engine running. When you use a saw to cut the pipe, the carbon steel spatters all over the place. The smoother the cut is, the easier it is to reweld with carbon steel and gas.
Brandon Cooper
the authorBrandon Cooper
This website is developed and supported by me who has been a passionate lover of power and automotive tools. I dedicate my home improvement projects in both DIY and professional type of person. I am an enthusiast and love to share what I know about this field.

Leave a Reply